pelican case foam replacement

Pelican Case Foam Replacement: But Why?

Introduction

Face it!

You’ll need a soft ester foam, which will provide excellent protection for precious or delicate goods while remaining flexible. 

However, you have a product of poor quality, which detracts from the value of your offering. It’s a major source of frustration for anyone. Hence, you might be looking for a replacement. We don’t blame you! It’s normal that the provided factory ones might not be that good! 

Your decision on whether or not to replace the product in your Pelican Case Foam, on the other hand, remains a mystery to you. As a result, you will be able to purchase a case foam for your product. But, it could be really expensive.

So, we are here to assist you in locating the most appropriate Pelican Case Foam Replacement for your product security requirements.

These might be the ones for you. Let’s begin-

Comparison Table

Product Weight Dimension
IZO Acoustic Foam Sheets 1.46 pounds 18.7 x 11.81 x 6.02 inches
Case Club Convoluted Foam N/A 53.5 x 16 x 0.5 Inches
Pelican  Foam Set 0.35 Pounds 7.25 x 3.06 x 4.75 inches
HQ Issue Tactical Foam 3.1 Pounds 40 x 13 x 4.5 inches
Case Club Customizable N/A 16 x 12 x 1.0 inches

IZO Acoustic Foam Sheets

Product Overview

This is the first and most important item on our shopping list. There is a lot of merchandise, but we pick and choose. 

It has a practical application as well as some negative aspects that should be discussed. In this article, we are prepared to provide them to you.

What are you thinking, exactly? Could you just scroll down and have a look at it?

The IZO Foam is suitable for use in chair cushions, acoustic foam, foam padding, foam mattress toppers, and soundproofing foam, among other applications. 

Plus, it is convenient for you to use it everywhere you go. However, it is also the finest option for your pelican case.

After that, if you consider the product’s quality, we will inform you that it’s the might of the finest of the materials. Plus, it has been certified by the United States. So, that could be a matter of relief!

In addition, the density of this foam is 1.20, and the compression rate is 33 lb per minute. Additionally, it is the soundproofing foam that allows you to have a smooth experience when using the product.

We’re now going to talk about the product’s internal structure. The IZO weighs only 1.46 pounds and measures 18.7 11.81 6.02 inches in length, width, and height. 

This provides the foam with a fantastic design as well as a fantastic appearance. So, this could be the best replacement for you, we hope!

Pros 

  • High-quality foam
  • It is fairly durable
  • Worked quite perfectly 
  • The product is versatile
  • Effective for using 

Cons

  • Fewer adhesives were included

Case Club Convoluted Foam 

Product Overview 

We have the following product on our list, which is called “Case Club Convoluted Foam”. We have done extensive research to determine why the product has risen to the top of the rankings.

Let me show you the high quality of this convoluted foam, which is second to none.

Starting off, Polythene is used to create a good-looking foam plank with dimensions of 53.5 x 16 x 0.5 inches. As a result, it possesses cells that are isolated from one another.

After that, it can be sliced with a razor blade or a hot wire with relative ease. As a result, it is simple to lose sight of your goal. No moisture or oils will be absorbed by it.

Before anything, cut away the excess material, and you’ll have a fantastic case for your pelican case. Another option is flimsy sliced foam, which is less durable. It has a high capacity for retaining water and collecting darts. It is not appropriate in your situation.

The overall quality of the goods is quite high. It is quite long-lasting when in use. As a result, it will simply fit into your case and will provide an excellent appearance for your pelican case foam.

Pros 

  • The quality is great
  • Cut easily with a knife
  • Cheapest per cubic inch
  • It’s sturdy and thick 
  • Easy to customize 

Cons

  • Hard to work with

Pelican Foam Set

Product Overview

This is the third item on our shopping list. Pelican foam has some significant advantages, which place the product at the top of our ranking.

There is no time to waste. Let us now go into the specifics-

The pelican case club is a simple product that you may personalize to your liking while also providing some additional protection.

Following that, the layers of foam are organized with tiny cubes, and the foam was die-cut into inch squares to finish the project. As a result, working with foam is simple, and it is simple to set up in any location.

The product’s measurements are 7.25 x 3.06 x 4.75 inches, and the weight of 5.6 ounces is evenly spread across the piece. As a result, the product has a more upscale appearance.

Pros

  • Easy to shape to your needs
  • It can easily fit
  • Works really great
  • Much durable 
  • Great for replacement 

Cons

  • Size is a little smaller to use

HQ Issue Tactical Foam

Product Overview

The “HQ Issue Tactical Foam” comes in at number four on our list of must-haves. Following the description of the three, it is likewise a fantastic product. 

We present the facts in such a way that you can understand them. Let’s go-

The headquarters’ design is the first thing to consider while discussing the topic. The pre-cut design can be quickly and easily replaced with the previous one.

Also, the device shields your goods from damage and keeps them out of the danger zone altogether. It is specifically designed for the gun, but it may also be used for other things such as case foam.

Following that, the quality of the foam is really excellent, and it is incredibly long-lasting when in use. The pluck gun case is made of direct replacement foam that highly protects the weapon.

Besides this, the product’s dimensions are 40134.5 inches, which gives it a pleasing appearance. And, its weight is 3.1 pounds, which makes it too light to be valid.

Lastly, the new case for the HQ problem is incredibly soft to the touch and spongy, which helps to keep the integrity of your device in good condition. Specially designed for use with complex cases. So, it could be a great replacement for you! 

Pros 

  • The quality is pretty good
  • Easy to use
  • Worked excellently 
  • Easy to cut and shape
  • Much durable

Cons

  • The product is not as same as the advertisement

Case Club Customizable

Product Overview

This is the last and final item on our shopping list. You are free to deal with the final four products. However, there is also some possibility for it to be included in our inventory, which is why we chose it. 

Don’t leave without giving your opinion on the product. There’s nothing to hide. Let’s start with the product itself-

The first thing to notice about the product is the material from which it is made. It comprises a closed closed-cell trial, which will not absorb moisture and preserve the oils.

After that, it is simple to cut with the razor and simple to set up with the case club afterward. Even with the carving knife or the hot wire, it is relatively easy to cut through. 

We believe that it can readily resolve your case foam issue, which you have been dealing with for a long time.

The product’s dimensions are 53.5 x 16 x 0.5 inches, and its weight is likewise relatively light, making it a handy tool for its intended use. And, if it comes down to the replacement of the Pelican Foam Replacement, this can be a great fit!

Pros 

  • Great from insert
  • Easy to cut the shape
  • Works perfectly 
  • It’s very durable and versatile 
  • The quality is pretty good

Cons

  • The Image and the actual product have a difference. 

Do You Even Need A Replacement?: Factors to Consider

They say it’s all down to instincts when you’re looking for a replacement. Yes! When you’ve been using a Pelican Foam Case for long, it would get wear-tear issues. So, it might come down to the point when you’ll need a replacement, 

And, yeah, it’s not about changing the whole thing. Here, the individual components can always be replaced if that is a more practical option for you.

Exactly what you’re looking for is the most excellent replacement components for your case foam, don’t you?

Finding an appropriate replacement for your product can be a time-consuming and difficult endeavor. Not to mention a complicated subject. 

So, the greatest substitute for the best case foam was identified through extensive research, and we ended up with some of the best products on our hands.

As you can see, it’s not only our words that are causing all of this havoc. Given that you will readily select one that matches your requirements, we are confident in presenting the advantages and disadvantages of the product in question. Let’s take a look at them-

Evaluate the Costs

When calculating the costs of repairing and replacing something, always consider the long term. Consider the cost of buying equipment, its service life, possible salvage value, and operational costs. 

Also, you could look at any revenue gain it may offer when purchasing new equipment.

For an aged piece of equipment, consider its probable service life, operational costs, market worth, and potential salvage rate. You can calculate an annual average price for any choice using these statistics, making comparisons simple.

Think About Your Safety

Keep in mind that if outdated equipment fails, it can injure workers. Even if you keep up with maintenance, equipment wears out over time. 

Before you make a decision, evaluate your machinery thoroughly to see if it will continue to create a safe working environment for your employees.

If it doesn’t work, the obvious solution is to replace it. If it still meets safety regulations, it’s worth weighing the price of replacement versus repair.

Think about Efficiency

Always keep the long term in mind. What is the current efficiency of your foam case? Would a simple repair keep it at that level? Or would a new piece of equipment that uses less risk, has more features and breaks down less frequently be better? 

Why Is a Replacement Necessary?: Some Added Considerations!

Consider the following things below and then ask yourself if a replacement is worth of your investment and time-

Consider the Equipment’s Age

Equipment doesn’t age gracefully. The older your equipment is, the more maintenance it will require. 

And, yep, the higher maintenance expenditures are generally the result of this. The equipment will give you less and less for your repair expenditure as you continue to repair it.

Replace an outdated, inefficient piece of equipment with a newer, more technologically sophisticated model will provide greater efficiency and lifespan. 

When your equipment is one-of-a-kind, it often makes more sense to repair it once it breaks down.

Consider Taking a Break

What are the implications of asset downtime while it is being repaired? If it takes several days for things to improve! Or whether it happens regularly, you’re looking at a lot of missed time. 

When considering whether repair or replacement is the preferable option in your case, keep this in mind.

Besides this, keep in mind, however, that repairing equipment typically takes less time than replacing it. 

Waiting for the replacement to come, installation, fresh training, and more are all part of the replacement process. If you’re on a tight deadline and the equipment is critical to your business, replacing it may cost you too much in terms of production.

Cleaning Factor of Pelican Foam Cases

Pelican Cases are an excellent choice for shipping equipment, gear, and supplies around the world; nevertheless, in today’s world, preventing the spread of germs and hazardous microorganisms is critical.

Because cases are frequently touched by multiple people and numerous viruses can survive on plastic surfaces for days (even weeks), proper cleaning precautions should be maintained at all times.

How to Choose the Best Pelican Case for Your Gear?

We know that Pelican Cases are built to last a lifetime, and some of our audience members can attest to this with cases that date back to the 1990s!

With 16 various sized Pelican Air cases now available, it’s critical to know how to safeguard your stuff as we enter this new decade. We felt it was about time for a quick lesson on how to calculate the proper size for the equipment you want to protect.

Step 1: Take Proper Dimensions 

You should begin by taking accurate measurements of the main object you want to protect. To start narrowing down the best case for you, you’ll need two of the three sizes available.

Begin by measuring the length and width of the main object, taking care to account for any extras such as lenses, batteries, and a cleaning kit, among other things. 

We’ve even done the legwork for you by producing this modern camera body guide with our favorite case model for some of the most popular cameras on the market today.

The key examples are as follows: 4 × 3 for mild instances, 19 x 11 for medium patients, and 40 x 14 for major cases.

Step 2: Case Choosing 

You will enter the size of your equipment here, and you will be presented with a number of various cases that would be suitable for your payload. 

If you have an object that is too huge for the Case Calculator, don’t worry, big thinker – “Pelican’s Custom Case Center” can design a case for practically anything you need to protect.

Step 3: Selecting the Interior 

It’s just as vital to have the right interior arrangement for your needs as it is to choose the right casing. Thankfully, Pelican has designed a variety of solutions to meet your specific requirements. 

“Pick N’ Pluck Foam” is a classic that features perforated cubes that can be readily removed, allowing you to modify the foam shape within your container. 

Moreover, the velcro on both sides of the yellow padded dividers allows you to create personalized channels and pockets for your gear. Pelican has been the exclusive provider of TrekPak, a repositionable divider system that enables clean, ordered, and yet adaptable case interiors, since last year.

FAQs

Question: What exactly are foam layers?

Answer: Foam boards are composed of three layers: an inner layer of polystyrene or polyurethane foam, which is covered with an outer facing on each side made of white clay-coated paper, archival cotton paper, or plain brown Kraft paper; and an outer facing made of white clay-coated paper, archival cotton paper, or plain brown Kraft paper. Alpha-cellulose wrapped boards are among the best foam boards for picture frames since they are acid-free.

Question: When making the protective case, what kind of foam is used?

Answer: Polyurethane foam is the most widely used and well-known type of foam. This form of polyurethane, often known as PU, is a charcoal-colored foam that has a density ranging between 1.3 and 1.5 pounds and is used in protective cases to keep items safe. It is referred to as open-cell polyurethane foam.

Question: What is the Pelican case’s size?

Answer:  The pelican case has an ideal size to buy. 35.75 x 13.50 x 5.25 inches Pelican 1700 The smallest of the rifle cases suggested. It should be able to fit one short/collapsible rifle as well as attachments. Foam in its natural state. 42.00 x 13.50 x 5.25 inches Pelican 1720 Regular foam rifle case is recommended for a longer typical rifle and accessories.

Final Words

That’s all we have for the best Pelican Case Foam Replacement on the market today. You must have done your research and come to a decision by now. 

And we sincerely hope that you would choose one of the products that we recommended.

However, if you haven’t made up your mind about your foam case yet, make sure to do some additional research. In any case, we are putting our trust in your expert hands. 

You’re well aware of what needs to be done. Wishing you the best of luck!

Leave a Comment

Your email address will not be published.

Scroll to Top